Dwin TransVision 3 Enhanced Instrucciones de operaciones descargar pdf (Pagina 7)

Introduction

TransVision

™

3 Enhanced(3E) is a High Deﬁnition Digital Video Projection sys-

tem comprising of two complementary components: a High Deﬁnition Video

Projector featuring Dark Chip

™

3 Digital Light Processing (DLP

™

) technology

from Texas Instruments and a Digital Video Processor. The TransVision

™

offers an outstanding progressive scan HDTV images with 16:9 aspect ratio

and 1280 x 720 (720P) native resolution.

The TransVision

™

Projector may be ﬂoor or ceiling mounted and conﬁgured

for front or rear projection.

The Digital Video Processor is designed to be located at the video sources.

It accepts a total of 10 video inputs, provides source switching, digital video

processing of analog and digital video sources and delivers a 720p digital

output to the Projector via a proprietary DVI cable.

The ten video inputs include: two HDCP compliant DVI-D; two RGB; two

Component Video; two S-Video and two Composite.

Signal connections between the Digital Video Processor and the Projector

are made through a proprietary DVI cable with a Control Signal. The Control

Signal is used to transmit bi-directional control signals (on, off, lamp status…)

between the Projector and the Processor.

An infrared learning wireless remote control with on-screen graphics selects

the input source and adjusts all of the operating controls. The system may also

be controlled from the front panel or from a RS-232 serial port.

IR sensors on both the Projector and the Processor allow the system to be

controlled from either unit.

Video and image settings for each individual video input may be adjusted

and stored separately in the system’s memory. These settings are recalled for

each input and video type when selected.

The TransVision

™

3E determines the video signal type by measuring horizon-

tal and vertical scanning frequencies. If the video signal matches a predeﬁned

video source, the TransVision

™

3E selects video and image settings from the

system’s memory. The predeﬁned video sources include: 480i, 480p, 580i, 580p,

1080i, 540p, and 720p and computer sources VGA, SVGA, XGA, SXGA.

In addition to predeﬁned video sources, the TransVision

™

3E allows the user

to create up to three new video source memory locations per video input.

For more details on how to create memory location for new video sources

refer to the “Image Setup Menu.

”

Two programmable 12 Volt screen trigger outputs are also provided to trig

ger a relay in an electric screen, projector lift, or other relay activated device.

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Comentarios a estos manuales

Sin comentarios

Dwin TransVision 3 Enhanced Instrucciones de operaciones Pagina 7

Comentarios a estos manuales